Fixation of canine tendons to metal

Abstract

For the purpose of developing a method to attach tendons directly to the prosthesis, canine supraspinatus tendons were attached in vitro to a metallic surface, using 3 different fixation devices: a spiked polyacetal washer (Synthes®), a spiked soft tissue fixation plate (Synthes®), and a newly designed Enhanced Tendon Anchor (ETA), which straddled the tendon with interlocking spikes oriented at a 20-degree angle. 2 methods were used: 1) the tendon was fixed directly to the metallic surface, or 2) a bone block containing the tendon insertion was fixed to the metallic surface. The specimens were tested for initial fixation strength in tension to failure; intact bone-muscle-tendon-bone units were used as controls. Bone block fixations were stronger than direct tendon fixations when the spiked washer or the ETA was used: this was not true of the fixation plate. The ETA was stronger than the other techniques in ultimate strength in both direct tendon fixation and bone block fixation. The soft tissue fixation plate was found to be weaker than the other techniques in bone block fixation.