Components of laxity in interference fit fixation of quadrupled hamstring grafts

Authors

  • Markus E Rittmeister
  • Philipp C Noble
  • James R Bocell Jr
  • Jerry W Alexander
  • Michael A Conditt
  • Harold W Kohl III

DOI:

https://doi.org/10.1080/000164702317281431

Abstract

We tested in vitro 15 Poly-L-lactic acid and 14 titanium interference screws in male human cadaver tibia-hamstring constructs. Elongation of the graft, displacement of the screw in the tibial tunnel, and slippage at the graft/screw interface were measured as outcomes with an infrared optical system. All constructs failed by slippage of the graft past the interference screw. On average, graft slippage accounted for 92% of total construct laxity at 5mm total construct elongation, whereas permanent stretching of the midsubstance of the graft accounted for only 8%. Movement of the interference screw in the tibial canal was minimal, averaging 0.01 (0-0.5) mm at construct failure. Inadequacy of isolated tibial interference screw fixation of soft tissue grafts may be overcome if early failure at the graft/screw interface is prevented.

Downloads

Download data is not yet available.

Downloads

Published

2002-01-01

How to Cite

Rittmeister, M. E., Noble, P. C., Jr, J. R. B., Alexander, J. W., Conditt, M. A., & III, H. W. K. (2002). Components of laxity in interference fit fixation of quadrupled hamstring grafts. Acta Orthopaedica, 73(1), 65–71. https://doi.org/10.1080/000164702317281431